Power Sprayer
Widely used in farmland , orchards , gardens , vegetable base rule controlling pests , water pumping , spray irrigation , etc. , can also be used in public places , such as cleaning and garbage site disinfection spray medicine .
- Please check carefully before starting each of the fasteners are tightened to ensure that sprayer and motor are mounted on a tripod ;
- Adjust the drive belt and two pulleys to a parallel state , elastic medium ;
- Each locking tube connector to prevent leakage ;
- Turn off the water before starting the motor switch , loosen the screw regulator , the regulator handle is pulled to the top ;
- The starter motor drive unit to maintain an appropriate rotational speed , the pressure in the end and handle end of the regulator to adjust the pressure regulator to keep the wheel in between 1.0-3.0MPa , the switch opens the water spray began to work properly ;
- Using the method according to the different needs and sprinklers , ibid method of adjusting to normal operating pressure.
| Model | FST-30D |
|---|---|
| Power | single cylinder: 168 f back stroke gasoline engine |
| The maximum power | 3.8 kw |
| Maximum speed | 3600 r/min |
| Form a complete set of pump | 30 type three plunger pump |
| Working pressure | 1.0-3.5 MPA |
| Traffic | 10 to 25 l/min |
| Speed | 800-1200 r/min |
| The basic configuration | 30 meters water high pressure pipe, and the inlet pipe, pipes, filters, spray gun, etc |
